Wiresock exiting unexpectedly

Home Forums Discussions Support Wiresock exiting unexpectedly

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #12327
    jdeleon247
    Participant

      When trying to use the Wiresock VPN Client service and also when trying to run Wiresock as a process, the application works temporarily before exiting. Running the process with log-level all gives no errors, and the Windows Event Viewer provides no additional details to the reason for the service exiting. How can I diagnose this problem?

      #12328
      Vadim Smirnov
      Keymaster

        Hmm, I suspect that this termination may be due to the panic of the Boringtun library on some particular network packet. Could you collect and share the pcap files by running the Wiresock with -log-level all until the application unexpectedly exits?

        #12697
        Vadim Smirnov
        Keymaster

          For those facing a similar issue, check the MTU configuration setting. As a rule, it should not exceed 1420 bytes (1440 bytes for IPv4 only tunnels), specifying a larger value, such as 1500, results in the behavior described above.

        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.