Start a captive portal

Home › Forums › Discussions › Support › Start a captive portal

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 18, 2014 at 6:53 pm #5405
    pcferri
    Participant

      Hi,

      I would like to develop captive portal software, as http://www.antamedia.com/hotspot/

      Will be installed on a machine with windows and two NICs. I share the internet from one network card to another. The NIC 1 is connected to the internet and 2 network adapter is connected to a wi-fi router.

      All laptops, phones and tablets will connect to wi-fi router.

      My software needs only to present a login page to authenticate users and free up your internet access after authenticated.

      My question is how to start this project with WinpkFilter?

      I got it run the wwwcensor project, i managed to block access to certain words, in the environment that I created, all requests from the router comes with the same IP and with that I can not block access to a specific IP.
      Can someone help me?

      Thank you very much.

      Regards,

      Pedro

      March 23, 2014 at 5:17 pm #7170
      Vadim Smirnov
      Keymaster

        Antamedia solution is based on WinpkFilter driver. In order to start you may want to look at Internet Gateway and LAN HTTP Monitor samples code.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.