Forums

[AlexDicy]

Thank you very much

[AlexDicy]

Hello Vadim, as you can see from the previous post and the videos in the folder, I have already tried disabling IPv6 from the connection properties and it solves the issue.

[AlexDicy]

Hello, thank you for your response.

Some context:

I have IPv4 and IPv6 enabled and working in my home network. I use a VPS that only has IPv4.

I want to route all IPv4 traffic with WireGuard and block IPv6 traffic (because the VPS doesn’t have IPv6 enabled).

I use these configuration lines to block IPv6 traffic:

 

[Interface]
Address = 10.128.0.3/32
DNS = 1.1.1.1

[Peer]
PersistentKeepalive = 15
AllowedIPs = 0.0.0.0/1, 128.0.0.0/1, ::/0

The issue:

DNS queries are slowed down in the browser and not working in the terminal. Websites load extremely slowly and sometimes they fail to load completely.

I did 3 tests:

1. IPv4 and IPv6 enabled with DNS servers 1.1.1.1 and 1.0.0.1
2. IPv4 and IPv6 enabled with DNS server 1.1.1.1 only
3. IPv4 only with DNS server 1.1.1.1 only

Tests 1 and 2 show failed nslookup and cause slowed down/broken browsing (like web pages not loading fully and taking a lot of time).

Here’s the link to the three tests: https://drive.google.com/drive/folders/1JIGSdrMuNDUMadzJEA9gyKxo21iAUIcx?usp=drive_link

Running using admin privileges and -lac option works, but the application mode causes these problems.

[AlexDicy]

Hello Vadim, do you have any update on this?

[AlexDicy]

Thank you, unfortunately, if I post my messages are still hidden. Use the previous google drive link to find the new logs and related files. Apparently, I cannot link anything else or it gets deleted/hidden.

[AlexDicy]

Hello Vadim, I think the anti-spam is deleting hiding all my new posts

[AlexDicy]

These are the pcap and other files linked with the log posted in this thread: https://drive.google.com/drive/folders/1JIGSdrMuNDUMadzJEA9gyKxo21iAUIcx?usp=sharing Thank you

[AlexDicy]

The option -lac is working fine, is there any way to run it without admin privileges?

[AlexDicy]

Please disregard the “DisallowedApps […] chrome.exe” because the config used for the logs did not include that line.

[AlexDicy]

Thanks for your answer. What’s new/different on the version you’ve linked? I tried it without changing anything and the issue persists. I will try the adapter mode later

[AlexDicy]

Log level: all

Cannot submit because of CleanTalk anti-spam. Link: https://pastebin.com/QcXg2jsw

[Author]

Posts