Virtual Network Adapter VirtNet 1.0 and Vista64

Home Forums Discussions Support Portal Virtual Network Adapter VirtNet 1.0 and Vista64

This topic contains 9 replies, has 4 voices, and was last updated by  htoth 7 years, 10 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #5231

    OHGnubbel
    Participant

    Hi,

    is there an way to use the Virtual Network Adapter VirtNet 1.0 in Vista 64?

    or is support for Vista planned?

    thanx
    OHG

    #6693

    Vadim Smirnov
    Moderator

    I’ll try to find some time to rebuild VirtNet for x64.

    #6694

    OHGnubbel
    Participant

    cool!

    thanx in advance!

    #6695

    ahosie
    Participant

    Vista x64 support would be fantastic for me too.
    Notwithstanding VirtNet has been very useful for application testing our products – thankyou for all your hard work.

    #6696

    Vadim Smirnov
    Moderator

    You can use VirtNet under Windows x64 if disable driver signing requirement (press F8 during system boot and choose Disable Driver Signature Enforcement option) or you can use test signing for VirtNet driver.

    #6697

    htoth
    Participant

    It is good to hear that virtnet supports XP/Vista 64 from now on. I have been waiting for this for ages. Many thanks!!!
    Could you please send me a link where I can download it from.
    thanks in advance, best regards,
    zsolt

    #6698

    Vadim Smirnov
    Moderator

    The download link is the same. Archive contain both 32 bit and 64 bit drivers.

    #6699

    htoth
    Participant

    I do not have it at all. Please write me the “same” link.
    Thanks in advance.

    #6700

    Vadim Smirnov
    Moderator
    #6701

    htoth
    Participant

    Hello,

    Thanks. I have tried to install it (after disabling Driver Signature Enforcement), and everything seems to be Ok, except the last panel (Completing the Add Hardware Wizard), which says: “The software for this device is now installed, but may not work correctly. Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)”. I would not worry about this message, on the other hand the newly installed virtnet card does not show up among the others. I have tried it several times, even restarted the system, but still missing.

    Please let me know if toy have any idea how resolve this problem.

    Many thanks in advance!

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.