Net firewall Natting for 2 network cards

Home Forums Discussions Support Portal Net firewall Natting for 2 network cards

This topic contains 3 replies, has 2 voices, and was last updated by  Kon 11 years, 1 month ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #5034

    Santron99
    Participant

    I like the GUI’s ease of navigation but I can’t seem to get the nat correct. I am on my second day of trying out the firewall to see if I can use it. I have 2 network cards. My private network is on 10.134.1.254. My public network is on 172.25.1.2. The security is set to low on both. How do I set up rules to nat all my 10.134.1.0 to 172.25.1.2 and pass it out the 172.25.1.2 network card. Then pass the response back to the appropriate 10.134.1.0 client.

    Thanks,
    Santron

    #6074

    Kon
    Participant

    Thank you for choosing NeT Firewall.

    In current version of NeT Firewall, NAT is not implemented, and you can use Routing and Remote Access, ICS included in your operation system.

    Andrew

    #6075

    Santron99
    Participant

    Thank you for your answer. After I posted that was exactly what I did and now its up and running. Do you think nat will be implemented within the next 6 months or maybee even longer range?

    #6076

    Kon
    Participant

    We are going to include NAT and traffic shaper in the end July.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.